$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Go To Roman And Woven Wood Parts
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part SVS6 White End Cap(1 pair)
1 x Part NV030- Valance Corner
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NP72D-Off White Right Side End Cap
2 x Part NM031C-1" Wand Tilter A
1 x Part NV023C-(Qty 2)Vertical Clip And Base
2 x Part NM043A-Loop Type Wand Tilter
1 x Part NP72G-White Left Side End Cap
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part NP37A- Motor Lock
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM005D Cord Tilter For 2" Blind
3 x Part NM003B 2" Wand Tilter Zinc Loop
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
2 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x YNP01B Left Side Cord lock (White only)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013D Wand Tilter
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM037 Cord Tilter For 1" Blind
1 x # Threading Tool
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x #1.4 mm cord size (click here for more information)
3 x Part NM035- 1 Inch Wand Tilter Left Side
2 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
2 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x ANP10A - White Right Side Body Cover
1 x Part NM012A Cord Tilter High Profile
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NV021a- Vertical Stopper
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
$998.86
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts