$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
2 x Part NP71 Off White Left Cord Clutch Cover
2 x Part NP66 Right Side Black Motor (no returns or refunds)
2 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
2 x YNP01D-Right Del Mar Green Lock
1 x Part NV030A- Valance Corner
2 x #V013A (Qty 25) Cord Holder (screws not included)
2 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
3 x ANP10A - White Right Side Body Cover
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
2 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NV029D (Qty 3) Valance Clip
2 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NV029A (Qty 3) Valance clip
3 x Part NV014- Silver Vertical Repair Clip
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
2 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
3 x Part NP44- Shaft And Connector For Ultraglide Shade
2 x Part NP05A Cord Wedge
1 x Part NP72F-Vanilla Left Side End Cap
2 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
3 x Part NV031B-Metal Link For 3dayblind Carrier
2 x Part NV027-#10 Vertical Chain Connector
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NV021- Lock Washer
2 x Part NV002D - Wand Control
3 x Part NP03D Plastic Washer 1/4" Outside Diameter
2 x Part NP37A- Motor Lock
2 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
2 x Part NP72D-Off White Right Side End Cap
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
2 x Part NP23 (Qty 1) Clutch Cover
1 x Part NV002B Vertical Track End Control Notchless
2 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
2 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP02- C Clamp For Cord Loop System
2 x Part NV003- Small Vertical Track End Control
2 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NV021a- Vertical Stopper
2 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
2 x Part NV002C End Control With Chain
1 x YNP01E-Del Mar Vanilla Left Side
2 x Part NP76 Grey Motor (no returns)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
2 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NV029J Valance Clips 3 per Order
2 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NP07A Wear Bar
1 x Part NV034 Luminette End Control Stem and Gear
2 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
2 x Part NP72J White Left Cord Clutch Cover
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x YNP01EF-Metal Cord Guide
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
2 x Part NP72I White Right Cord Clutch Cover
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NV005- Carrier Uses Plastic Link
1 x YNP01B Left Side Cord lock (White only)
2 x Part NP16B Tape Only (160 feet)
1 x Part NV012B1- Plastic Link
1 x Part NV001-100 Clips(no returns)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP72H-White Right Side End Cap
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP36B White Plastic Plug
2 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
2 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
2 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
2 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
2 x Go To Roman And Woven Wood Parts
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
2 x #1.4 mm cord size (click here for more information)
2 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
2 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
2 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
2 x #1.2 mm cord size (click here for more information)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x # Threading Tool
$2,159.00
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts