$14.99

Part NP65 Right Side Blue Motor (no returns or refunds)
[blinds parts]

Part NP65 Right Side Blue Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Right Side Blue Motor (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
2 x Part NM031D- 1" Wand Tiler With Clutch
3 x Part 34 Installation Bracket
1 x Part NP75 White Motor (no returns)
3 x Part 30A Brown Bracket LP (screws not included)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
3 x Part 36 Pleated Shade Bracket (1)
3 x Part 08- Silhouette Installation Bracket (screws not included)
1 x YNP01G-(1)Cord Guide
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
3 x Part 32A Vertical Track Bracket
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP72G-White Left Side End Cap
2 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP16B Tape Only (160 feet)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
3 x Part 25 Small Installation Backet (screws not included)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x YNP01D-Right Del Mar Green Lock
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
2 x Part 07- Installation Bracket (screws not included)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP07A Wear Bar
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
3 x Part 33A Vertical Track Bracket
1 x Part NP36B White Plastic Plug
1 x Part NP72H-White Right Side End Cap
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x YNP01EF-Metal Cord Guide
1 x Part NP05A Cord Wedge
1 x Part NP39A stopper
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP36A Clear Plastic Plug
1 x Part NP36C Off White Plastic Plug
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x ANP10A - White Right Side Body Cover
1 x Part NP37A- Motor Lock
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x YNP01C Left Side Cord lock (White only)
1 x ANP11B - White Left Side Lock Body
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x #1.4 mm cord size (click here for more information)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part SVS92 White End Cap(1 pair)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x #1.8 mm cord size (click here for more information)
1 x Go To Roman And Woven Wood Parts
1 x # Threading Tool
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part SVS6 White End Cap(1 pair)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x #2.7 mm cord size (click here for more information)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NV002 Vertical Track End Control
1 x Part NV001-100 Clips(no returns)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NV002C End Control With Chain
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NV021- Lock Washer
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM038E - 1" Wand Tilter
1 x Part NV009A- Vertical End Control
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV012B1- Plastic Link
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012A Cord Tilter High Profile
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NM038D - 1" Wand Tilter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV030A- Valance Corner
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM008 - Wand Tilter
1 x Part NM013C- 2" Wand Tilter
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NV001A Fabric Weight
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV027-#10 Vertical Chain Connector
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NV029A (Qty 3) Valance clip
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV003- Small Vertical Track End Control
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM031C-1" Wand Tilter A
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV030- Valance Corner
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
$2,624.10
Notifications
NotificationsNotify me of updates to Part NP65 Right Side Blue Motor (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts