$14.99

Part NP76 Grey Motor (no returns)
[blind parts]

Part NP76 Grey Motor (no returns)
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. I only have these basic instructions. Remove motor and stack the shade up turning the rod in the opposite direction of the loading arrow. This arrow is found on the motor. To install new motor, make one full turn in the direction of the turn rod loading motor, I use an allan wrench. Place a pin in the top hole to lock it in place, I use a paper clip. Install motor, remove pin and lower the shade.
Reviews
Currently viewing: Part NP76 Grey Motor (no returns)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
2 x Part NP10A- Cord Guide 1 3/4" Wide
2 x Part NP05A Cord Wedge
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x Part NP16A- Plug For Easy Rise Tape
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NP66L Black Motor Left Side (no returns or refunds)
2 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
2 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
2 x Part NP62 cord guide
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
2 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NP72H-White Right Side End Cap
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM013D Wand Tilter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #1.8 mm cord size (click here for more information)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM012- 2" Wand Tilter For Low Profile
2 x Part NP75 White Motor (no returns)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
2 x Part NP36B White Plastic Plug
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part NP16B Tape Only (160 feet)
2 x Part NP72D-Off White Right Side End Cap
2 x ANP10A - White Right Side Body Cover
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
2 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
2 x YNP01D-Right Del Mar Green Lock
2 x Part NP65 Right Side Blue Motor (no returns or refunds)
2 x ANP11B - White Left Side Lock Body
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
2 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
2 x ANP11A - Vanilla Left Side Lock Body
2 x YNP01EF-Metal Cord Guide
1 x #1.4 mm cord size (click here for more information)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
2 x Part NP37A- Motor Lock
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM011- Wand Tilter For 1" Blind
2 x YNP01E-Del Mar Vanilla Left Side
2 x Part NP72G-White Left Side End Cap
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM008 - Wand Tilter
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
2 x Part NP72B-Right Side Blue Cord Clutch
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x #1.2 mm cord size (click here for more information)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
2 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
2 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
2 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013D- Compatible Tilter Ships Out
2 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM038E - 1" Wand Tilter
2 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
2 x Part NP36C Off White Plastic Plug
2 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
2 x Part NP39A stopper
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
2 x YNP01C Left Side Cord lock (White only)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
2 x Part NP02- C Clamp For Cord Loop System
1 x Part NM039-Barrel and Cradle For 1" Blind
2 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM005A Cord Tilter Fits Hex Rod
2 x YNP01G-(1)Cord Guide
1 x Part NP23 (Qty 1) Clutch Cover
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
2 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
2 x Part NP72J White Left Cord Clutch Cover
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
2 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Go To Roman And Woven Wood Parts
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
2 x Part NP07A Wear Bar
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x # Threading Tool
1 x Part NM037 Cord Tilter For 1" Blind
2 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM015- White Wand Tilter For One Inch blind
2 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #2.7 mm cord size (click here for more information)
2 x Part NP72I White Right Cord Clutch Cover
1 x Part NM040J- Valance Clip (Quantity 15)
2 x YNP01B Left Side Cord lock (White only)
2 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
2 x Part NP67A- Right Side White Motor (no returns or refunds)
2 x Part NP36A Clear Plastic Plug
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
2 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM043A-Loop Type Wand Tilter
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
2 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NV010- Vertical Track Sprocket (Qty 1)
2 x Part NV030- Valance Corner
2 x Part NV023C-(Qty 2)Vertical Clip And Base
2 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
2 x Part NV001-100 Clips(no returns)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
2 x Part NV029A (Qty 3) Valance clip
2 x Part NV014B- Clear Plastic Slat Repair Tab
2 x Part NV029J Valance Clips 3 per Order
2 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
2 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV021- Lock Washer
2 x Part NV002B Vertical Track End Control Notchless
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
2 x Part NV012B1- Plastic Link
2 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
2 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
2 x Part NV002C End Control With Chain
1 x Part NV005- Carrier Uses Plastic Link
2 x Part NV034 Luminette End Control Stem and Gear
2 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
2 x Part NV014A- White Vertical Repair Clip
2 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV021a- Vertical Stopper
2 x Part NV031B-Metal Link For 3dayblind Carrier
2 x Part NV026- #10 Vertical Chain $.99 Per Foot
2 x Part NV027-#10 Vertical Chain Connector
2 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
2 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
2 x Part NV014- Silver Vertical Repair Clip
2 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
2 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
2 x Part NV029H-(Qty 5) Valance Clip
1 x Part NP76 Grey Motor (no returns)
1 x Part NV002D - Wand Control
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV002 Vertical Track End Control
2 x Part NV001A Fabric Weight
1 x Part NV003- Small Vertical Track End Control
2 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
2 x Part NV030A- Valance Corner
1 x Part NV015- Top Plug For Vertical Fabric
2 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
2 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
2 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
2 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV009A- Vertical End Control
$3,650.80
Notifications
NotificationsNotify me of updates to Part NP76 Grey Motor (no returns)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts