$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x YNP01C Left Side Cord lock (White only)
2 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV029J Valance Clips 3 per Order
2 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV003- Small Vertical Track End Control
2 x Part NV010- Vertical Track Sprocket (Qty 1)
2 x Part NV001-100 Clips(no returns)
2 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
2 x Part NV021a- Vertical Stopper
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
2 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV015- Top Plug For Vertical Fabric
2 x Part NV014- Silver Vertical Repair Clip
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP72H-White Right Side End Cap
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NP05A Cord Wedge
2 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
2 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV021- Lock Washer
2 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
2 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NP16B Tape Only (160 feet)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP07A Wear Bar
2 x Part NV030A- Valance Corner
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP62 cord guide
2 x Part NV005- Carrier Uses Plastic Link
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NV001A Fabric Weight
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP36C Off White Plastic Plug
1 x ANP10A - White Right Side Body Cover
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NP36B White Plastic Plug
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV014A- White Vertical Repair Clip
2 x Part NV002D - Wand Control
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NP37A- Motor Lock
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV002 Vertical Track End Control
1 x Part NV030- Valance Corner
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV029A (Qty 3) Valance clip
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP75 White Motor (no returns)
$969.74
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts