$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV029J Valance Clips 3 per Order
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP72F-Vanilla Left Side End Cap
2 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM024- Mini Blind Cord Lock
1 x ANP10A - White Right Side Body Cover
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
2 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x YNP01EF-Metal Cord Guide
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP39A stopper
1 x Part NM012A Cord Tilter High Profile
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP36A Clear Plastic Plug
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP37A- Motor Lock
1 x Part NM013C- 2" Wand Tilter
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
$541.62
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts