$14.99

Part NP65L Blue Motor Left Side (no returns or refunds)

Part NP65L Blue Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
2 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP39A stopper
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NP07A Wear Bar
1 x Part NP05A Cord Wedge
1 x YNP01G-(1)Cord Guide
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NP02- C Clamp For Cord Loop System
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NP36A Clear Plastic Plug
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV030- Valance Corner
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NV001-100 Clips(no returns)
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NM013C- 2" Wand Tilter
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
$450.02
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts