$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Part NP67A- Right Side White Motor (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV029J Valance Clips 3 per Order
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM024- Mini Blind Cord Lock
1 x ANP10A - White Right Side Body Cover
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
2 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x YNP01EF-Metal Cord Guide
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM014A- Wand Tilter For 2" High Profile
2 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP39A stopper
1 x Part NM012A Cord Tilter High Profile
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP36A Clear Plastic Plug
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
2 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP37A- Motor Lock
1 x Part NM013C- 2" Wand Tilter
2 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP72H-White Right Side End Cap
2 x Part NM046- Craddle For Low Profile (Quantity 10)
2 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM008 - Wand Tilter
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
$689.43
Notifications
NotificationsNotify me of updates to Part NP67A- Right Side White Motor (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts